ABOZARIBA, Raouf, ASADUZZAMAN, Md and PATWARY, Mohammad (2018) Optimal Auctions in Oligopoly Spectrum Market with Concealed Cost. In: IEEE 88th Vehicular Technology Conference: VTC2018-Fall 27–30 August 2018, Chicago, USA. (In Press)
ALAGAB, Samir, TENNAKOON, Sarath and GOULD, Christopher (2018) Comparison of Single-stage and Multi-stage Marx DC-DC Converters for HVDC application. In: 2018 53rd International Universities Power Engineering Conference (UPEC). 2018 53rd International Universities Power Engineering Conference (UPEC) . IEEE, pp. 1-6.
Abuowada, Karem, DYKE, David, Noroozi, Siamak and Okhotnikov, Ivan (2018) Dynamic Performance Analysis of PID and Fuzzy Logic Controllers Applicable in Electrohydraulic Servo Actuator. In: 3th APCA International Conference on Automatic Control and Soft Computing (CONTROLO 2018), 4-6 June 2018, Ponta Delgada, São Miguel Island, Azores, Portugal.
Atia, Salwa (2018) DUAL FUNCTIONALITY ARTIFICIAL NEURAL NETWORK TECHNIQUE FOR WELLS TURBINE BASED WAVE ENERGY CONVERSION SYSTEM. Doctoral thesis, Staffordshire University.
BIN TAREK, Mirza Farhan, ASADUZZAMAN, Md and PATWARY, Mohammad (2018) Spatio-Temporal Analysis of Large Air Pollution Data. In: 10th International Conference on Electrical and Computer Engineering (ICECE 2018). IEEE. (In Press)
Gasparyan, Diana (2018) From Fundamental Ontology Toward Fundamental Anthropology: Subject as a Negativity (Hegel, Kojève, Heidegger, and Sartre). Doctoral thesis, Staffordshire University.
Harasteh, Hibod and GOHARI DARABKHANI, Hamidreza (2018) Sensitivity Analysis of the Heat Exchanger Design in Net Power Oxy-Combustion Cycle for Carbon Capture. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 12 (3). pp. 235-243. ISSN 1307-6892
Hui, Zhanqiang, Zhang, Youkun and SOLIMAN, Abdel-Hamid (2018) Mid-infrared dual-rhombic air hole Ge 20 Sb 15 Se 65 chalcogenide photonic crystal fiber with high birefringence and high nonlinearity. Ceramics International, 44 (9). pp. 10383-10392. ISSN 02728842
Hussain, Ahmed A., Tayem, Nizar, Butt, Muhammad Omair, SOLIMAN, Abdel-Hamid, Alhamed, Abdulrahman and Alshebeili, Saleh (2018) FPGA Hardware Implementation of DOA Estimation Algorithm Employing LU Decomposition. IEEE Access, 6. pp. 17666-17680. ISSN 2169-3536
Ikhide, Monday, TENNAKOON, Sarath, GRIFFITHS, Alison, Ha, Hengxu, Subramanian, Sankara and Adamczyk, Andrzej (2018) Transient-based protection technique for future DC grids utilising travelling wave power. The Journal of Engineering, 2018 (15). pp. 1267-1273. ISSN 2051-3305
Ikhide, Monday, TENNAKOON, Sarath, GRIFFITHS, Alison, Ha, Hengxu, Subramanian, Sankara and Adamczyk, Andrzej (2018) A transient based protection technique for future DC grids utilising travelling wave power. The Journal of Engineering, 2018 (15). pp. 1267-1273. ISSN 2051-3305
Ikhide, Monday, TENNAKOON, Sarath, GRIFFITHS, Alison, Ha, Hengxu, Subramanian, Sankara and Adamczyk, Andrzej J. (2018) A novel time domain protection technique for multi-terminal HVDC networks utilising travelling wave energy. Sustainable Energy, Grids and Networks, 16. pp. 300-314. ISSN 23524677
Jacobs, W.R., Baldacchino, T., DODD, Tony and Anderson, S.R. (2018) Sparse Bayesian Nonlinear System Identification using Variational Inference. IEEE Transactions on Automatic Control. ISSN 0018-9286
Jacobs, W.R., DODD, Tony and Anderson, S.R. (2018) Frequency-domain analysis for nonlinear systems with time-domain model parameter uncertainty. IEEE Transactions on Automatic Control. ISSN 0018-9286
KOMILIAN, Soheil, OKLOBIA, Ochai and SADAT-SHAFAI, Torfeh (2018) Data related to the PC71BM loading and it's impact on nanostructuring for blend of PBDTTT-EFT:PC71BM bulk heterojunction solar cell. Data in Brief, 16. pp. 506-510. ISSN 2352-3409
MAJID ALI, Muhammad, GRIFFITHS, Alison and HASAN, Mohammad (2018) Study of Brain Signal Extraction, Processing and Implementation. In: IEEE 24th International Conference on Automation & Computing, 6-7 September 2018, Newcastle University, Newcastle upon Tyne, UK.
Noori, Sahar and SHAHROKHI, Ava (2018) Favorable Plug Shape of an Aerospike Nozzle in Design, Over and Under Expansion Conditions. Journal of Computational and Applied Research in Mechanical Engineering. ISSN 2251-6549
Oklobia, O., KOMILIAN, Soheil and SADAT-SHAFAI, Torfeh (2018) Impedance spectroscopy and capacitance – voltage measurements analysis: Impact of charge carrier lifetimes and mapping vertical segregation in bulk heterojunction P3HT: PCBM solar cells. Organic Electronics. ISSN 15661199
PACKER, Neil and AL-SHEMMERI, Tarik (2018) Conventional and Alternative Power Generation. John Wiley & Sons, Ltd. ISBN 978-1-119-47940-6
PATWARY, Mohammad, ASADUZZAMAN, Md and ABOZARIBA, Raouf (2018) Multi-Operator Spectrum Sharing Models under Different Cooperation Schemes for Next Generation Cellular Networks. In: Vehicular Technology Conference (VTC-Fall), 2017 IEEE 86th, 24-27 Sept. 2017, Toronto, ON, Canada.
Parrott, C., DODD, Tony and Gross, R. (2018) HyMod: A 3-DOF hybrid mobile and self-reconfigurable modular robot and its extensions. In: Distributed Autonomous Robotic Systems: 13th International Symposium. DARS 2016. Springer Proceedings in Advanced Robotics, 6 . Springer, London, UK, pp. 401-414. ISBN 978-3-319-73006-6
SADAT-SHAFAI, Torfeh, OKLOBIA, Ochai and KOMILIAN, Soheil (2018) Controlling intercalations of PBDTTT-EFT side chain to initiate suitable network for charge extraction in PBDTTT-EFT:PC71BM blended bulk heterojunction solar cell. Solar Energy Materials & Solar Cells, 175. pp. 35-40. ISSN 0927-0248
STUBBS-HAYES, Francesca (2018) AN INVESTIGATION INTO THE SELECTIVE DEPOSITION OF IRON OXIDE WET POWDER SUSPENSION. Doctoral thesis, Staffordshire University.
Seyyedi Razaz, Seyyedeh Parisa, BAZOOYAR, Bahamin, Pirhoushyaran, Tahereh and Shaahmadi, Fariborz (2018) Evolving a least square support vector machine using real coded shuffled complex evolution for property estimation of aqueous ionic liquids. Thermochimica Acta, 670 (27-34). pp. 27-34. ISSN 00406031
Wang, Chuang, Chen, Xu’nan, SOLIMAN, Abdel-Hamid and Zhixiang, Zhu (2018) RFID Based Manufacturing Process of Cloud MES. Future Internet, 10 (11). ISSN 1999-5903