AL-SHEMMERI, Tarik (2011) Energy Audits: A Workbook for Energy Management in Buildings. Wiley-Blackwell. ISBN 0470656085
AL-SHEMMERI, Tarik (2012) Engineering Fluid Mechanics. Ventus Publishing, Holland. ISBN 978-87-403-0114-4
AL-SHEMMERI, Tarik (2010) Engineering Thermodynamics. Ventus Publishing / BookBoon. ISBN 978-87-7681-670-4
AL-SHEMMERI, Tarik (2009) Instrumentation and Measurements: Basic Principles Worked Examples and Tutorial Problems Laboratory Exercices. VDM Verlag. ISBN ISBN-10: 3639206428
AL-SHEMMERI, Tarik (2010) Wind Turbines. Ventus Publishing / Bookboon. ISBN 978-87-7681-692-6
AL-SHEMMERI, Tarik and Oberweis, S. (2011) Correlation of the NOx emission and exhaust gas temperature for biodiesel. Applied Thermal Engineering, 31 (10). 1682- 1688. ISSN 1359-4311
Aggogeri, Francesco, Mazzola, Marco and O'KANE, James (2009) Implementing DFSS to increase the performance level of an extrusion process. International Journal of Six Sigma and Competitive Advantage, 5 (1). p. 10. ISSN 1479-2494
Ahmed, K, PATWARY, Mohammad and ABDEL-MAGUID, Mohamed (2011) Compressive parametric GLRT detector for airborne MIMO radar. In: Wireless Communications and Signal Processing (WCSP), 2011 International Conference on, 9-11 Noivember 2011.
CHAMMAA, RH, THOMAS, Peter BM and KHALIL, A (2010) Single retrograde intramedullary wire fixation of metacarpal shaft fractures. Acta Orthopaedica Belgica, 76. pp. 751-757. ISSN 0001-6462
CHATZISTERGOS, Panagiotis, Magnissalis, Evangelos and Kourkoulis, Stavros (2010) A parametric study of cylindrical pedicle screw design implications on the pullout performance using an experimentally validated finite element model. Medical Engineering & Physics, 32 (2). pp. 145-154. ISSN 1350-4533
CHATZISTERGOS, Panagiotis, SAPKAS, GEORGIOS and KOURKOULIS, STAVROS (2010) The Influence of the Insertion Technique on the Pullout Force of Pedicle Screws. Spine, 35 (9). E332-E337. ISSN 0362-2436
CHATZISTERGOS, Panagiotis, Spyrou, Charidimos, Magnissalis, Evangelos and Kourkoulis, Stavros (2013) Dependence of the pullout behaviour of pedicle screws on the screw-hosting material relative deformability. International Journal of Computer Aided Engineering and Technology, 5 (4). pp. 343-361. ISSN 1757-2665 (In Press)
DAVIS, Colin (2010) How to interact with Universities and the HE Knowledge base to your company's advantage. In: MEDTEC 2010. (Unpublished)
DAVIS, Colin, Hogarth, T and Gambin, L (2012) Sector Skills Insights: Manufacturing. Technical Report. UK commission for employment and skills, Evidence Report 48.
ENNIS, OW, MAHMOOD, A, MAHESHWARI, R, THOMAS, Peter BM and MOORCROFT, Christopher (2008) Prospective study of closed tibial diaphyseal fractures treated by monolateral external fixation. Injury Extra, 39 (5). pp. 204-205. ISSN 1572-3461
HOOPER, Peter, AL-SHEMMERI, Tarik and GOODWIN, Michael (2011) Advanced modern low-emission two-stroke cycle engines. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (11). pp. 1531-1543. ISSN 0954-4070
HOOPER, Peter, AL-SHEMMERI, Tarik and GOODWIN, Michael (2012) An experimental and analytical investigation of a multi-fuel stepped piston engine. Applied Thermal Engineering, 48 (n/a). pp. 32-40. ISSN 1359-4311
HUDA, Md nazmul, YU, Hongnian and GOODWIN, Mike (2012) Experimental study of a capsubot for two dimensional movements. In: 2012 UKACC International Conference on Control (CONTROL). IEEE, IEEE, pp. 108-113. ISBN 978-1-4673-1559-3
Hogarth, T, DAVIS, Colin and Behle, H (2011) Working for a Green Britain. Technical Report. RenwableUK, Employment and Skills in the UK Wind and Marine Industries.
MAHMOOD, A, ENNIS, OW, HUSSEIN, N, THOMAS, Peter BM and OGRODNIK, Peter (2008) Closed tibial fractures in footballers treated with mono-lateral external fixation: A prospective study of 92 cases. Injury Extra, 39 (5). pp. 180-181. ISSN 1572-3461
Intelligent Orthopaedics Ltd (MOORCROFT, Christopher, OGRODNIK, Peter and THOMAS, Peter B) (2010) Wire Retainer for Surgical Device. GB2428454 B.
Intelligent Orthopaedics Ltd (MOORCROFT, Christopher, OGRODNIK, Peter and THOMAS, Peter BM) (2010) FIXATOR. GB 2427141 B.
MOORCROFT, Christopher, THOMAS, Peter and OGRODNIK, Peter (2008) RELIABILITY OF FRACTURE STIFFNESS AS A MEASUREMENT OF CLINICAL UNION AND VISCO-ELASTIC PROPERTIES OF CALLUS. Orthopaedic Proceedings, 90B (SUPP 3). p. 465. ISSN 2049-4416
NIKOLAJSEN, Jorgen (2013) Fractional Significant Digits. Methods and Algorithms for Scientific Computing, 35 (2). A561-A576. ISSN 1064-8275
OBERWEIS, Sacha (2011) Development of a small scale CHP biomass system for the Luxembourgish market. Doctoral thesis, Staffordshire University.
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2009) Design of a 20kW Biomass Heat Generator: CFD Modelling and Dissociation. VDM, Saarbruecken (Germany). ISBN 978-3-639-15922-6
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2010) Effect of Biodiesel blending on emissions and efficiency in a stationary diesel engine. European Association for the Development of Renewable Energies, Environment and Power Quality.
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Emissions and performance from a biomass boiler for different solid biomass. Int. J. Renewable Energy Technology, 3 (4). pp. 323-340. ISSN 1757-3971
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Emissions and performance from a biomass boiler for different solid biomass fuels. International Journal of Renewable Energy Technology, 3 (4). pp. 323-340. ISSN 1757-398X
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2011) Emissions and performance of a stationary diesel engine run on biodiesel blends. International Journal of Oil, Gas and Coal Technology, 4 (4). pp. 375-386. ISSN 1753-3309
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2011) Gamma-Stirling engine – The effect of different working gases and pressures. European Association for the Development of Renewable Energies, Environment and Power Quality.
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Performance Evaluation of a Lithium-Chloride Absorption Refrigeration and an Assessment of its Suitability for Biomass Waste Heat. Applied Sciences, 2 (4). pp. 709-725. ISSN 2076-3417
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Performance Evaluation of a Lithium-Chloride Absorption Refrigeration and an Assessment of its Suitability for Biomass Waste Heat. Applied Sciences, 2 (4). pp. 709-725. ISSN 2076-3417
OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2011) Performance and Emissions Evaluation of Absorption Refrigeration Cooling from Biomass Waste Heat. In: CIBSE Technical Symposium 2011, September 6-7 2011, DeMontfort University, Leicester, UK.
OGRODNIK, Peter (2012) Medical Device Design, Innovation from concept to market. Academic Press / Elsevier. ISBN 9780123919427
OGRODNIK, Peter (2009) Medical Devices Design. In: Innovation Forum, MEDTEC 2009. (Submitted)
OGRODNIK, Peter and DAVIS, Colin (2009) Medical Interchange at MEDTEC 2009. [Show/Exhibition]
OGRODNIK, Peter and DAVIS, Colin (2010) Medical Interchange at MEDTEC 2010. [Show/Exhibition]
OGRODNIK, Peter, DAVIS, Colin and MOORCROFT, Christopher (2009) Medical Interchange at MEDICA 2009. [Show/Exhibition]
OGRODNIK, Peter, GOODWIN, Michael, BANCROFT, Gordon and XU, Wubin (2009) The Stability Analysis of Hydrodynamic Journal Bearings Allowing for Manufacturing Tolerances. Part II: Stability Analysis Model with Consideration of Tolerances. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation. IEEE, pp. 168-171. ISBN 978-0-7695-3583-8 (In Press)
OGRODNIK, Peter, MOORCROFT, Christopher and THOMAS, Peter BM (2008) THE MEASUREMENT OF THE NON-LINEAR MECHANICAL PROPERTIES OF FRACTURED HUMAN TIBIAE DURING HEALING. Orthopaedic Proceedings, 90B (SUPP 3). p. 466. ISSN 2049-4416
OGRODNIK, Peter, MOORCROFT, Christopher and WARDLE, Peter (2013) The effects of laser marking and symbol etching on the fatigue life of medical devices. Journal of Medical Engineering, 2013 (570354). pp. 1-6. ISSN 2314-5129
Intelligent Orthopaedics Ltd / P J Ogrodnik / P B M Thomas (OGRODNIK, Peter and THOMAS, Peter) (2013) SURGICAL TARGETING GUIDE. PCT/GB2012/051735.
OGRODNIK, Peter, THOMAS, Peter, MOORCROFT, Christopher and MOHAMMED, Khaja (2013) A multi-directional fracture stiffness model to determine the principal stiffness properties of a healing human tibia. Journal Of Engineering In Medicine - Part H, 227 (10). pp. 1125-1134. ISSN 09544119
OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2012) Effect Analysis of Journal Out-of-roundness on Dynamic Performances of Rotor Bearing System. In: Rotor Dynamics: 8th IFTOMM International Conference 2010. Curran Associates, USA. ISBN 9781618393470
OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2011) The effects of dimensional manufacturing tolerances on stability of a symmetric hydrodynamic journal bearing rotor system – an experimental investigation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (12). pp. 1152-1158. ISSN 1350-6501
OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2011) A theoretical investigation of the use of 2k factorial analysis to determine the effects of dimensional manufacturing tolerances on the stability of hydrodynamic journal bearing systems. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (8). pp. 731-739. ISSN 1350-6501
Peter, Hooper (2012) An experimental and analytical investigation into the heavy fuel operation of a stepped piston engine for unmanned air vehicle application. Doctoral thesis, Staffordshire University.
THEMELI, Hariklia (2010) A proposed model of curricula development based on studies of two Mechanical Engineering Departments in Greece. Masters thesis, Staffordshire University.
THOMAS, Peter, OGRODNIK, Peter, MOORCROFT, Christopher and OCKENDEN, Matthew (2011) A NEW EXTERNAL FIXATION SYSTEM FOR TIBIAL SHAFT FRACTURES. In: OTA Annual Meeting, Oct 12-15, 2011, San Antonio, Texas , USA.
THOMAS, Peter B M, ENNIS, O W, MOORCROFT, Christopher and OGRODNIK, Peter (2010) THE STAFFORDSHIRE ORTHOPAEDIC REDUCTION MACHINE IN TIBIAL PLATEAU, SHAFT AND PILON FRACTURES. Orthopaedic Proceedings, 92B (SUPP 3). p. 403. ISSN 2049-4416
THOMAS, Peter BM, ENNIS, O W, WAGNER, W, MOORCROFT, Christopher and OGRODNIK, Peter (2010) A NEW EXTERNAL FIXATION SYSTEM FOR TIBIAL SHAFT FRACTURES. Orthopaedic Proceedings, 92B (SUPP 3). pp. 402-403. ISSN 2049-4416
Tsilikas, Stavros, Stamatis, Emmanouil, Kourkoulis, Stavros, Mitousoudis, Athanasios, CHATZISTERGOS, Panagiotis and Papagelopoulos, Panayiotis (2011) Mechanical Comparison of Two Types of Fixation for Ludloff Oblique First Metatarsal Osteotomy. The Journal of Foot and Ankle Surgery, 50 (6). pp. 699-702. ISSN 1067-2516
XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2010) Effect of Manufacturing Tolerances on Stiffness and Damping of Hydrodynamic Journal Bearings. Advanced Materials Research, 139-41. pp. 2662-2667. ISSN 1662-8985
XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2012) A New Dimensionless Stability Map of Rotor Bearing System Allowing for Manufacturing Tolerances Based on a Modified Summerfeld Number. In: Rotor Dynamics: 8th IFTOMM International Conference 2010. Curran Associates, USA. ISBN 9781618393470
XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2009) The Stability Analysis of Hydrodynamic Journal Bearing System Based on Sommerfeld Number. Chinese Journal Of Mechanical Engineering (Cme), 20 (23). pp. 2875-2889.
XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2009) The Stability Analysis of Hydrodynamic Journal Bearings Allowing for Manufacturing Tolerances. Part I: Effect Analysis of Manufacturing Tolerances by Taguchi Method. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation. IEEE, pp. 164-167. ISBN 978-0-7695-3583-8
XU, Wubin, OGRODNIK, Peter, LI, B, LI, J and LI, S (2008) Simplified Stress Analysis of Large-scale Harbor Machine’s Wheel. In: Global Design to Gain a Competitive Edge. Springer-Verlag, LONDON, pp. 355-364. ISBN 978-1-84800-238-8
XU, Wubin, ZHOU, DJ, OGRODNIK, Peter and GOODWIN, Michael (2012) Comparison of Effects of Dimensional Manufacturing Tolerances and Journal Out-of-Roundness on Stability of Hydrodynamic Journal Bearing System. Applied Mechanics and Materials, 121-26. pp. 1966-1971. ISSN 1662-7482
![[up]](/style/images/multi_up.png)
Up a level