BANCROFT, Gordon

Article

OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2011) A theoretical investigation of the use of 2k factorial analysis to determine the effects of dimensional manufacturing tolerances on the stability of hydrodynamic journal bearing systems. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (8). pp. 731-739. ISSN 1350-6501

OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2011) The effects of dimensional manufacturing tolerances on stability of a symmetric hydrodynamic journal bearing rotor system – an experimental investigation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225 (12). pp. 1152-1158. ISSN 1350-6501

XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2010) Effect of Manufacturing Tolerances on Stiffness and Damping of Hydrodynamic Journal Bearings. Advanced Materials Research, 139-41. pp. 2662-2667. ISSN 1662-8985

XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2009) The Stability Analysis of Hydrodynamic Journal Bearing System Based on Sommerfeld Number. Chinese Journal Of Mechanical Engineering (Cme), 20 (23). pp. 2875-2889.

Book Chapter, Section or Conference Proceeding

OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2012) Effect Analysis of Journal Out-of-roundness on Dynamic Performances of Rotor Bearing System. In: Rotor Dynamics: 8th IFTOMM International Conference 2010. Curran Associates, USA. ISBN 9781618393470

XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2012) A New Dimensionless Stability Map of Rotor Bearing System Allowing for Manufacturing Tolerances Based on a Modified Summerfeld Number. In: Rotor Dynamics: 8th IFTOMM International Conference 2010. Curran Associates, USA. ISBN 9781618393470

OGRODNIK, Peter, GOODWIN, Michael, BANCROFT, Gordon and XU, Wubin (2009) The Stability Analysis of Hydrodynamic Journal Bearings Allowing for Manufacturing Tolerances. Part II: Stability Analysis Model with Consideration of Tolerances. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation. IEEE, pp. 168-171. ISBN 978-0-7695-3583-8 (In Press)

XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2009) The Stability Analysis of Hydrodynamic Journal Bearings Allowing for Manufacturing Tolerances. Part I: Effect Analysis of Manufacturing Tolerances by Taguchi Method. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation. IEEE, pp. 164-167. ISBN 978-0-7695-3583-8