Items where Division is "Engineering" and Year is 2012

Article

AMJAD, Anas, GRIFFITHS, Alison and PATWARY, Mohammad (2012) Multiple face detection algorithm using colour skin modelling. IET Image Processing, 6 (6). pp. 1093-1101. ISSN 1751-9659

Ahmed, K.I., PATWARY, Mohammad and Khan, N.M. (2012) Superimposed training-based compressed sensing of sparse multipath channels. Communications, IET, 6 (18). pp. 3150-3156. ISSN 1751-8628

BURROWS, Brian, DALGARNO, A and COHEN, M (2012) Asymptotic exchange energies for H2. Physical Review A (PRA), 86 (5). 052525. ISSN 1050-2947

Dhooge, Willem and OBERWEIS, Sacha (2012) Improving sustainable biomass utilisation in North West Europe (NWE). Regional Review, 24. p. 41.

HOOPER, Peter, AL-SHEMMERI, Tarik and GOODWIN, Michael (2012) An experimental and analytical investigation of a multi-fuel stepped piston engine. Applied Thermal Engineering, 48 (n/a). pp. 32-40. ISSN 1359-4311

OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Emissions and performance from a biomass boiler for different solid biomass. Int. J. Renewable Energy Technology, 3 (4). pp. 323-340. ISSN 1757-3971

OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Emissions and performance from a biomass boiler for different solid biomass fuels. International Journal of Renewable Energy Technology, 3 (4). pp. 323-340. ISSN 1757-398X

OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Performance Evaluation of a Lithium-Chloride Absorption Refrigeration and an Assessment of its Suitability for Biomass Waste Heat. Applied Sciences, 2 (4). pp. 709-725. ISSN 2076-3417

OBERWEIS, Sacha and AL-SHEMMERI, Tarik (2012) Performance Evaluation of a Lithium-Chloride Absorption Refrigeration and an Assessment of its Suitability for Biomass Waste Heat. Applied Sciences, 2 (4). pp. 709-725. ISSN 2076-3417

WITHANAGE, Ruchira and SHAMMAS, Noel (2012) Series connection of insulated gate bipolar transistors (IGBTs). Power Electronics, IEEE Transactions on, 27 (4). pp. 2204-2212. ISSN 0885-8993

XU, Wubin, ZHOU, DJ, OGRODNIK, Peter and GOODWIN, Michael (2012) Comparison of Effects of Dimensional Manufacturing Tolerances and Journal Out-of-Roundness on Stability of Hydrodynamic Journal Bearing System. Applied Mechanics and Materials, 121-26. pp. 1966-1971. ISSN 1662-7482

Book Chapter, Section or Conference Proceeding

GOULD, Christopher and SHAMMAS, Noel (2012) Three Dimensional TCAD Simulation of a Thermoelectric Module Suitable for use in a Thermoelectric Energy Harvesting System. In: Small-scale energy harvesting. Typesetting InTech Prepress, Janeza Trdine 9, 51000 Rijeka, Croatia, pp. 29-42. ISBN 978-953-51-0826-9

HUDA, Md nazmul, YU, Hongnian and GOODWIN, Mike (2012) Experimental study of a capsubot for two dimensional movements. In: 2012 UKACC International Conference on Control (CONTROL). IEEE, IEEE, pp. 108-113. ISBN 978-1-4673-1559-3

OGRODNIK, Peter, XU, Wubin, GOODWIN, Michael and BANCROFT, Gordon (2012) Effect Analysis of Journal Out-of-roundness on Dynamic Performances of Rotor Bearing System. In: Rotor Dynamics: 8th IFTOMM International Conference 2010. Curran Associates, USA. ISBN 9781618393470

XU, Wubin, OGRODNIK, Peter, GOODWIN, Michael and BANCROFT, Gordon (2012) A New Dimensionless Stability Map of Rotor Bearing System Allowing for Manufacturing Tolerances Based on a Modified Summerfeld Number. In: Rotor Dynamics: 8th IFTOMM International Conference 2010. Curran Associates, USA. ISBN 9781618393470

YUAN, Fei, YU, Hongnian and BURROWS, Brian (2012) A review of methods for hydrodynamic analysis of helical swimming flagella. In: Conference onAutomation and Computing (ICAC), 2012 18th International. IEEE, pp. 1-8. ISBN 978-1-4673-1722-1

Monograph or Report

DAVIS, Colin, Hogarth, T and Gambin, L (2012) Sector Skills Insights: Advanced Manufacturing: Evidence Report 48. Technical Report. HMSO.

DAVIS, Colin, Hogarth, T and Gambin, L (2012) Sector Skills Insights: Manufacturing. Technical Report. UK commission for employment and skills, Evidence Report 48.

Conference or Workshop Item

SHAMMAS, Noel (2012) Integration of High-Power Light Emitting Diodes (LED's) and High-Resolution Colour Camera into Endoscopes for Medical Applications. In: Proceedings of the 11th International Conference on Microelectronics, Nanoelectronics, Optoelectronics (MINO '12), 2-4 april 2012, Saint Malo & Mont Saint-Michel, France.

SHAMMAS, Noel (2012) Plenary lecture 6: integration of high-power light emitting diodes (LED's) and high-resolution colour camera into endoscopes for medical applications. In: ACMIN'12 Proceedings of the 14th international conference on Automatic Control, Modelling & Simulation, and Proceedings of the 11th international conference on Microelectronics, Nanoelectronics, Optoelectronics, 2-4 April 2012, Saint Malo & Mont Saint-Michel, France.

Book / Proceeding

OGRODNIK, Peter (2012) Medical Device Design, Innovation from concept to market. Academic Press / Elsevier. ISBN 9780123919427